Pink twin comforter set for a helper that resembles a large pillow case with attachments on one side. Not only will you use the blanket to protect a blanket and keep it looking new and free of stains and wear, but with a blanket you will also be able to change the color and appearance of your bedding by changing the blanket. Use special clips or clips to keep your console in place in a duvet cover
Place the blanket on the bed with the top edge of the pink twin comforter set on top of the bed and the opening of the blanket against the bottom of the bed. The blanket must be collected in the top edge of the bed so that you can reach the bottom open and reach the two top corners to place the console inside the rug. Put in the upper right corner of the console in the upper right corner of the rug, and fasten with a downhill clip to hold it in place. Put the upper left corner of the console in the top left corner of the rug and fasten it in the same way with a cover clip.
Lift the pink twin comforter set and console of the upper right and left corners and shake properly to get the duvet cover down over the consoles. Continue shaking until the cover is as much comfort as possible. Put the blanket and consolatory back on the bed and pull the blanket down so that the whole console is in the deck. Adjust down to the right and left corners and place a blank cut in each corner to hold the looser in place. Zip or button closes closed along the open edge to finish.