Automatic Chicken Door Diy Closed

Easy Build Automatic Chicken Door Diy

October 22, 2019 Tools

Ideas for Board and Batten Shutters DIY

Board and batten shutters DIY – Board and batten wooden shutters are easy to build. They are an easy way to add a rustic look on the exterior of your home. There are a number of ways to create these shutters, but for the most part, they are simply two or three boards nailed together. Board and batten shutters are a good choice if you want to change the look of your home’s exterior but do not want to put a lot of time or effort.

Board and batten shutters DIY, measure the length of your exterior windows. Add 3 inches for the top and bottom replacement. If you want more or less, adjust that amount. Cut four pieces of 1-by-8-inch lumber the length you specified in the previous step. Sand the ends and any flaws with a hand grinder. Add two pieces of wood side by side on a flat surface. Line up the tops and bottoms of the two parts. Allow 1/2 inch distance between the two parts.

Board and batten shutters DIY, measure the width of the two boards are. Cut two pieces of 1-by-4-inch lumber to that length. Sand the ends and rough spots on these boards. Place the first part of the 1-by-4-inch lumber 10 inches from the top of the shutter. Place the second piece 10 inches from the bottom. The ends of the 1-by-4-inch lumber should be even with the outer edges of the wooden shutter. Mount the second shutter in the same way. Let the glue dry on this shutter too.

Tags: diy interior shutters distance between shutters with hinges

Comments are closed.